Placeholder image - no photograph of the Infinite Discs Tomb yet
Flight path RHBH
Infinite · Putt & Approach

Tomb

Flight Numbers

3

Speed

4

Glide

0

Turn

1

Fade

Buy the Tomb
Affiliate links. Prices and stock change.
Share

About the Tomb

Tomb: Infinite’s stable putt & approach

The Infinite Discs Tomb is a stable putt-and-approach disc rated 3/4/0/1 — flat-topped, low-profile and beaded, and a disc Infinite calls one of the most popular in its line.

Zero turn and one fade means a straight flight with a small, predictable finish. Infinite says it has “just the right amount of stability to cover ground while threading the needle on approach shots, whether thrown forehand or backhand.” Reviewer averages from 205 reviews read 3.1/4/0/1.1, a match. At 3 speed it asks for no arm speed: slower players can drive with it, and stronger ones can count on it not turning over on an approach.

Infinite sells it as a crossover too — it “can also be used as a crossover mid-range, driving putter, or to hold the line while putting from distance or in moderate winds.” OTB Discs places it behind the Ruin, Infinite’s more overstable approach disc, with “a much straighter flight.” It won’t handle strong wind or a shot that needs a hard fade.

Infinite places it with its Egyptian molds without further explanation. A tomb is a burial chamber or monument for the dead, like those built for ancient Egypt’s rulers.

The Tomb has had more than twenty runs and one of Infinite’s longest plastic lists: C-, D-, G-, I-, N- and S-Blend and R-Blend Soft among the base plastics, plus glow, gummy, halo, swirly, splatter and metal-flake runs. PDGA approved in March 2018.

Flies like…

How much the Tomb turns and fades depends on how hard it is thrown. These three shapes are drawn from the manufacturer’s numbers, not from measured throws.

BeginnerUnder 300 ft drive
Intermediate300-400 ft drive
AdvancedOver 400 ft drive

What the numbers mean

Speed3How fast it has to be thrown
Glide4How long it stays in the air
Turn0Right at high speed
Fade1Left as it slows down

PDGA specs

Measured by the PDGA when the Tomb was certified. Each drawing shows what the number measures.

First approved
Mar 29, 2018
Section drawing of a disc golf disc with the diameter dimensioned
Diameter21.3cmOutside edge to outside edge. The PDGA allows 21 to 30 cm; nearly every golf disc sits just over 21.
Section drawing of a disc golf disc with the height dimensioned
Height1.6cmFrom the bottom of the rim to the top of the dome, standing flat.
Section drawing of a disc golf disc with the rim depth dimensioned
Rim depth1.3cmFrom the bottom of the rim up to where the inner rim meets the flight plate — the pocket your fingers curl into. At least 1.1 cm.
Section drawing of a disc golf disc with the rim width dimensioned
Rim width1.1cmOuter edge to inner edge of the rim (the PDGA calls it rim thickness). Wider rims generally mean faster discs. Capped at 2.6 cm.
Section drawing of a disc golf disc with the inside rim diameter dimensioned
Inside rim diameter19.1cmAcross the hollow underneath, inner rim wall to inner rim wall. At least 15.8 cm.
Section drawing of a disc golf disc with the rim depth ratio dimensioned
Rim depth ratio6.1%Rim depth as a share of the diameter. The PDGA allows 5 to 12 percent.

Available plastics

Speed · Glide · Turn · Fade

Discs with similar flight numbers

Westside DiscsCrownStable3401
Westside DiscsMaidenStable3401
InfiniteAlpacaStable3301
Thought SpaceAlterStable3301
MVPAtomStable3301
GatewayChiefStable3301
DiscmaniaLogicStable3301
AGLMadroneStable3301
ProdigyPA-3Stable3301
Latitude 64PeakStable3301
Same brand, same type

More Infinite putters

InfiniteAlpacaStable3301
InfiniteScarabStable2401