Placeholder image - no photograph of the Infinite Discs Squire yet
Flight path RHBH
Infinite · Fairway Driver

Squire

Flight Numbers

8

Speed

6

Glide

0

Turn

1

Fade

Buy the Squire
Affiliate links. Prices and stock change.
Share

About the Squire

Squire: Infinite’s stable fairway driver

The Infinite Discs Squire is a stable 8-speed fairway driver rated 8/6/0/1, and Infinite’s newest driver — PDGA approved in June 2026.

Zero turn and one fade is about as neutral as a driver gets: a straight flight with plenty of glide and a mild finish. During testing Infinite described “a mild fade at the end of the flight that will minimize skips.” That suits a wide range of arms. Slower throwers get an easy straight line with the glide doing the work; faster arms will see a little turn at the top and can use it for long, straight fairway shots. It’s too new for reviewer averages to mean much yet.

Infinite calls it “the first 8-speed fairway driver in the Infinite lineup, filling the gap between slower fairway drivers and higher-speed control drivers,” and during testing placed it “somewhere between a Centurion and an Exodus.” With a single point of fade it won’t give a hard finish, and it isn’t a wind disc.

The Squire began as “Prototype 2,” one of three test molds Infinite put to a customer vote in April 2026, chosen from ten combinations Innova offered. Infinite hasn’t explained the name. A squire was a young attendant to a medieval knight, usually in training for knighthood — a step away from the ancient cultures Infinite has named most of its lineup after.

Available in C-Blend and I-Blend.

Flies like…

How much the Squire turns and fades depends on how hard it is thrown. These three shapes are drawn from the manufacturer’s numbers, not from measured throws.

BeginnerUnder 300 ft drive
Intermediate300-400 ft drive
AdvancedOver 400 ft drive

What the numbers mean

Speed8How fast it has to be thrown
Glide6How long it stays in the air
Turn0Right at high speed
Fade1Left as it slows down

PDGA specs

Measured by the PDGA when the Squire was certified. Each drawing shows what the number measures.

First approved
Jun 29, 2026
Section drawing of a disc golf disc with the diameter dimensioned
Diameter21.1cmOutside edge to outside edge. The PDGA allows 21 to 30 cm; nearly every golf disc sits just over 21.
Section drawing of a disc golf disc with the height dimensioned
Height1.7cmFrom the bottom of the rim to the top of the dome, standing flat.
Section drawing of a disc golf disc with the rim depth dimensioned
Rim depth1.1cmFrom the bottom of the rim up to where the inner rim meets the flight plate — the pocket your fingers curl into. At least 1.1 cm.
Section drawing of a disc golf disc with the rim width dimensioned
Rim width1.8cmOuter edge to inner edge of the rim (the PDGA calls it rim thickness). Wider rims generally mean faster discs. Capped at 2.6 cm.
Section drawing of a disc golf disc with the inside rim diameter dimensioned
Inside rim diameter17.5cmAcross the hollow underneath, inner rim wall to inner rim wall. At least 15.8 cm.
Section drawing of a disc golf disc with the rim depth ratio dimensioned
Rim depth ratio5.2%Rim depth as a share of the diameter. The PDGA allows 5 to 12 percent.

Available plastics

Speed · Glide · Turn · Fade

Discs with similar flight numbers

AxiomBokehStable7601
DiscmaniaFDStable7601
DiscraftPassionStable85-11
DGAPipelineStable8502
Latitude 64StrikerStable8502
DiscmaniaEssenceUnderstable86-21
Westside DiscsStagStable86-12
Latitude 64VisionStable86-12
MVPAmpStable85-1.51
Viking DiscsCosmosStable7501
Same brand, same type

More Infinite fairway drivers

InfiniteDynastyStable95-12
InfiniteSphinxUnderstable96-31
InfiniteCenturionStable75-12
InfiniteExodusStable75-0.52